Service manual

24
DW70.C
Water hardness setting
Activate settings menu. :
1. Turn o the machine using the main power
switch.(I/0)
2. Wait for at least 5 seconds.
3. Press and hold the start button (S2)
4. Turn on the machine using the main power
switch(I/0)
5. Realese the button (S2)
6. Use the Program button (S1) to select the
desired status
Setting:Waterhardness[°dH]
(Germanwaterhardnessscale)
Display: 0 0-5 (also applies to machines without
water softener)
Display shows: 1 6-8
Display shows: 2 9-11
Display shows: 3 12-14
Display shows: 4 15-19
Display shows: 5 20-24
Display shows: 6 25-29
Display shows: 7 30-39
Display shows: 8 40-49
Display shows: 9 50+
Conrm your selection by pressing Start (S2). The
program returns to the main menu.
Panel type DW70.3, L = LED, S = Push button,
Total reset
To reset the machine to its factory settings.
1. Turn o the main power switch (I/0)
2. Wait at least 5 seconds.
3. Press and hold the Program button (S1)
4. Switch o the main power switch (I/0)
5. Release the Program button (S1).
The machine will reset various settings, although
not water hardness, water inlet volume and feel
presence of turbidity, pressure sensor and
Spray arm diverter and then automatically return
to the main menu. Detects the presence of a pres-
sure sensor.