Technical data

Page 7
Customer Care Center
1-800-898-1879
www.askousa.com

1. Attach the light shielding film (packed in the
document bag) to the underside of the countertop
above the touch buttons. (Only certain models).

The light shielding lm ensures optimal button
functionality.

The surface on which the protective lm is to be
attached must be clean and dry.
1
2. Attach the supplied door sealing
(only certain models).
This strip is an essential part of the Turbo Dry
Express system and must be installed to ensure
an optimum seal between the dishwasher tank
and door.
1
2
2
3. Start by measuring the height from the oor to the
bottom edge of the counter top. Measure the height
from the oor to the top edge of the dishwasher.
4.
Push the plastic feet into place on all steel feet
(included in document bag).

Do not attach the plastic feet if the installation space
is too tight.
3
5. Loosen the lock nuts on the dishwasher’s steel
feet using a 5/8 inch (16 mm) open-ended wrench.
Screw the lock nuts down as close to the oor as
possible.
5/8" (16 mm)