Technical data
Page 3
Customer Care Center
1-800-898-1879
www.askousa.com
• It is important that you closely follow the instructions
provided here.
• An incorrect or defective installation can lead to
higher consumption of energy, water and dishwashing
detergent, which can lead to higher costs and poor
cleaning results.
• Plumbing and electrical installations must be carried
out by qualied professionals.
• Exercise caution during the installation! Wear protective
gloves! Always work in pairs!
• The power outlet for the dishwasher should be
installed in a location that is easily accessible once
the dishwasher is installed.
• Always follow the applicable regulations for water, drain
and electrical connection.
• If a dishwasher must be hard wired, it must be
connected to a grounded circuit.
Turn off the water supply when installing the dishwasher!
• There must be a shut o valve on the water supply pipe.
The shut o valve should be installed in a location that
is easily accessible so that the water may be shut o
in the event that the dishwasher needs to be moved.
• Cable holes for wires/cables need not be larger than
1-1/2˝ (38 mm).
• Attach the light shielding film (see FITTING THE
DISHWASHER IN PLACE). Only select models.
Check that the tting and connection measurements are
correct. See UNIT DIMENSIONS and PREPARING THE
LOCATION.