Technical data

Page 16
Customer Care Center
1-800-898-1879
www.askousa.com

6. Check that the dishwasher’s steel feet are solidly
placed on the oor. Make sure the dishwasher is
not hanging in the air by the mounting tabs. If it is,
turn the front feet to lower them until the machine is
resting on the feet.
7. Also adjust the dishwasher’s steel feet so that the
dishwasher is level.
8. Tighten the lock nuts on the steel feet with a 5/8 inch
(16 mm) open-ended wrench.
5/8" (16 mm)