Specifications

36
24
7
/
8
˝
(632 mm)
23 ½
˝
(597 mm)
67˝ – 69˝
(1702 mm – 1753 mm)
With 6
˝ HiddenHelper
™
:
72
˝ – 73˝
(1829 mm – 1854 mm)
39˝ – 40˝
(991 mm – 1016 mm)
With 6
˝ HiddenHelper
™
:
44
1
/
8
˝ – 45
1
/
8
˝
(1121 mm – 1146 mm)
46 ¼˝
(1175 mm)
36˝
(914 mm)
4 ¾˝
(121 mm)
Specifications are subject to change without notice. See installation instructions for additional details.
PLANNING & DESIGN:
™
CLASSIC

Any ASKO family-size dryer can be
mounted on top of any matching
ASKO washer. Stacking kits are
provided with the ASKO family-size
ASKO family-size
dryer Use and Care Guide for
stacking instructions.
Every ASKO family-size washer is
delivered ready-fitted with a plug
and is intended for connection to
an ASKO family-size dryer which is
equipped with a matching receptacle.
When an ASKO family-size washer
is connected to the ASKO

Amp sin gle-phase circuit. When
the ASKO family-size dryer is on a

single-phase circuit. If the washer
is used separately or with another

20 Amp single-phase circuit.
When placing a stacked set next to a
wall or cabinet, be sure to leave ¼˝
(6 mm) of space between the washer
and the wall or cabinet.
NOTE: Condenser dryers require
adequate ventilation for proper
operation. A louvered door is
recommended for closet installations.
ASKO condenser dryers must
be installed to continuously drain
through a hose attached to the rear
of the machine. To ensure proper
drainage, the drain must not be
higher than 40˝ (1016 mm) above the
bottom of the dryer.
See page 33 for venting requirements.
See page 34 for condensation drain
requirements.
See page 38 for stacked cabinet or
closet installation dimensions.
WARNING ! Never stack a washer on
top of a dryer!
WARNING! To reduce the risk
of fire, vented dryers must be exhausted
OUTDOORS or the equivalent.
Never cover the end of the dryer stub
or vent hose with anything to catch lint,
Dimensions
 
 67˝– 69˝ 1702 – 1753 mm
˝ 
**
73˝– 75˝ 1854 – 1905 mm
 23 ½˝ 597 mm
  24
7

8
˝
*
632 mm
  247 – 265 lbs 112 – 120 kg
*
Includes control knob.
**
Height with 6˝ (152 mm) HiddenHelper
™
installed. The following 6˝ (152 mm) height
HiddenHelpers models are available – HI115, HDB115, HB115.
**
No venting required for condenser dryer (T753C). When HiddenHelper
™
is specified,
see pages 42-43. The following 6˝ (152 mm) height HiddenHelpers models are available
HI115 , HD B115 , HB115 .