Specifications

PLANNING & DESIGN: 
™

Specifications are subject to change without notice. See installation instructions for additional details.
The door hinges on ASKO dryers are shipped left-hinged, but they are
reversible. See the ASKO Dryer Use and Care Guide for more information.
When placing the dryer next to a wall or cabinet, be sure to leave ¼˝ (6 mm)
of space between the dryer and the wall or cabinet.
NOTE: Condenser dryers require adequate ventilation for proper operation.
NOTE: A louvered door is recommended for closet installations.
See page 35-36 for stacked washer/dryer dimensions.
See pages 37-40 for cutout dimensions for closet and under-cabinet installations.
Condensation Drain Requirements


1. Disconnect the short hose (1) from the blue connection.
(It´s okay to let the hose hang down.)
2. Connect the rubber hose supplied with the dryer to the blue nipple (2).

NOTE: Power cord not supplied
with unit.
NOTE: The drain hose must not be
more than 40˝ (1016 mm) above the
floor or the bottom of the unit.
46-1/8"; 1172 mm
(FI Model) 23-1/8"; 587 mm
23-7/8"; 606 mm
(FI Model) 47-7/8"; 1216 mm
23-1/2"
597 mm

 
 33 ½˝– 34 ½˝ 851 – 876 mm
 23 ½˝ 597 mm
 23
7

8
˝ 606 mm
46
1

8
˝ 1172 mm
 104 lbs 47 kg
*
Includes control knob.
Technical Data
Supply voltage Single-phase
 
Max Wattage 2800 W
NOTE: When on a separate outlet,
use 220 V, 20 Amp single-phase circuit.
When an ASKO wash er is connected,
use 220 V, 30 Amp sin gle-phase circuit.
1
3
3
40"
(1016 mm)
maximum
height
2
Back of dryer
34