Specifications

12
ASKO´s dishwashers come with all the connections you need. We´ve eliminated the need to get into the electrical and
mechanical area, which makes installation simple and quick. If a dishwasher is being installed in an area for the first time,
most of the cabinetwork, plumbing, and electrical has to be done before you move the machine into place. If you are
replacing an old dishwasher, you must check the plumbing connection and wiring before you install the new dishwasher.
This system has these components which have been approved by regulatory
authorities (C):
 
3

8
˝
compression fitting that mates with a
3

8
˝ shut-off valve. Length: 5´2˝ from
back of unit.
 
built into this hose on the back of the unit. Length: 53˝ past fixed high loop
from back of unit.
 
This eliminates the need to wire anything under the unit.
 
rear leg from the front of the unit.
Pex hose with
3
/
8
˝ brass fitting.
Already wired with a standard
three-pronged plug.
Front-adjustable rear leg
(select XXL models).
Drain hose with multiple size adaptor
EASYINSTALL
™
DISHWASHERS
Back of ASKO dishwasher with EasyInstall
™
system.