Technical information

19
How to use the drying cabinet
Starting
1. Place the articles to be dried in the drying
cabinet and shut the door. See also the
section ’Choosing where to place the
washing’.
2. Set an appropriate temperature and drying
time. See the section ’Setting the tempe-
rature selector knob’.
3. Press on the START button (only certain
markets).
Interrupting the drying
Open the door and turn the time selector knob
back to ’0’.’
Setting pause and restart
Pause: Open the door
Restart: Shut the door and press on the
START button (only certain mar
kets)
In the cabinet there are three sections with
hangers.Every section has a number of rods
on which to hang the washing.
The optimised hanging system has extensible
hangers. This system lightens the work for
those who hang up the washing and spares
both their back and shoulders.
 Hang the articles in the drying cabinet
according to how much room they take
up - not according to their weight.
 For optimum efficiency - do not lay artic-
les flat on the upper hanging section.
 Long clothes nearest to the walls of the
cabinet and shorter ones towards the
centre. By hanging the washing in this
way the most efficient drying results are
attained.
 Turn up the two lower hanging sections
if long clothes are to be dried.
 Hang gloves, caps, scarves and suchlike
on the hanging bars on the inside of the
door.
 Draw forward the upper hanging section
hanger hooks in order to hang up the
washing more easily. Put it back when it
is not being used.
If you have made a pause in the drying
process, when it starts again, the
drying cabinet carries on from the
position it was at when the drying
cycle was interrupted. If you want to
completely stop the set drying cycle,
the time selector knob is put back to
’0’.
WARNING
Read the safety instructions on page 4
before using the drying cabinet
Choosing where to place the
washing