Technical information

10
1
2
3
4
5
6
Connection to the evacuation duct
The drying cabinet must not be
connected to the fireplace chimney
ATTENTION
When the cabinet is on, 45 m³ of humid air are
evacuated per hour. So make sure that air can
penetrate into the room to replace the humid
air given off by the drying cabinet.
With a draught limiter
The exhaust air duct valve is replaced by a
draught limiter (included in the delivery).
See also the section ’Connect Ventilation’
page 14.
Do not assemble the ventilation duct
valve inside the drying cabinet
The drying cabinet can be connected to the evacuation duct in two ways
1. Humid air out
2. Hose
3. Sleeve coupling
4. Draught limiter
5. Air intake
6. Ventilation duct valve
The drying cabinet is connected to the
evacuation duct with a draught limiter