OPERATING INSTRUCTIONS Dishwasher DBI664 XXLSSOF
Contents Display panel Important safety instructions Before washing for the first time Loading the dishwasher Using the dishwasher Settings 2 3 4 6 9 13 Care and maintenance instructions Troubleshooting Technical information Service Notes Quick start guide 15 17 20 21 22 24 Dear Customer, Thank you for choosing this quality product from ASKO. We hope it will meet your expectations and fulfill your needs for many years to come.
Important safety instructions SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WARNING! When using your dishwasher, follow basic precautions, including the following: • Read all instructions before using the dishwasher. • Use the dishwasher only for its intended function. • Use only detergents or wetting agents recommended for use in a dishwasher and keep them out of the reach of children.
Before washing for the first time 1. Checking water hardness 2. Basic settings In order to achieve good dishwashing results, the dishwasher needs soft water (water with low mineral content). Hard water leaves a white coating on dishes and the dishwasher. To switch on the dishwasher, press and hold the main power switch until the display lights up. Water hardness is specified using the following scales: The German water hardness scale (°dH) and the French water hardness scale (°fH).
3. Top up with rinse aid 4. Fill up with salt Use rinse aid to improve wash and dry times. Also use rinse aid to achieve clear and spotless results. Before you begin using a dishwasher with a water softener, you must fill the salt compartment with salt for the water supply to be softened automatically. Use large grain salt or special dishwasher salt. Press to open WARNING! In order to avoid rust stains, a dishwashing program must be started immediately after adding salt.
Loading the dishwasher Energy-efficient dishwashing Fragile dishes Run programs only with a full load Wait until the dishwasher is fully loaded before running a program, this way you save energy. Use the Rinse and hold program to rinse the dishes if there are any unpleasant odors while you wait for the dishwasher to become fully loaded. Some cookware is not dishwasher safe. This can be for several reasons. Some materials cannot withstand high temperatures, others can be damaged by dishwasher detergent.
The baskets The dishwasher includes a top cutlery tray, an upper basket, and a lower basket with a cutlery basket. The basket appearance may differ depending on the configuration. Top cutlery tray The top cutlery tray accommodates cutlery, ladles, whisks, and other utensils. Raising the upper basket 1 Pull out the upper basket. 2 Grab the sides of the upper basket with both hands and lift it up. Lowering the upper basket 1 Pull out the upper basket.
Typical load for 10 place settings Upper basket with 10 place settings AHAM DW-1 Washing large plates Move adjustable tines and their mounts to widen the distance between the tine rows to adapt the lower basket to plates with a diameter greater than 9 3/4" (25 cm). Cutlery basket Place cutlery with the handles facing down, except for knives, and spread them out as much as possible. Ensure that spoons do not stack inside each other.
Using the dishwasher Add detergent Press to open NOTE! Use only dishwasher detergent! Liquid hand-washing detergent must not be used as the foam that forms prevents the dishwasher from operating effectively. Dishwasher tablets Halve the tablet if it is difficult to close the dispenser lid. There is a risk that the detergent will not be released properly if the lid is tight and cannot open correctly.
Press and hold the main power switch until the display lights up. Starting the dishwasher START Eco STOP 2:00 Speed mode Select the program Select a program mode The main power switch Press and hold the main power switch until the display turns on. Also check that the water supply valve is on. Select a program To select a program, press the Navigation button or until the desired program is shown on the display. Choose a program to suit the type of dishes and how dirty they are.
1 Press the button once to activate Delayed Start. Press the button several times – or hold it in – to set the desired number of hours. 2 Press Start/Stop and close the door. The timer counts down and the dishwasher starts after the selected delay. If you want to cancel the Delayed Start option, open the door and press and hold the main power switch until the display turns off. TIP! Activate the setting High temperature to improve the dishwashing results. Energy consumption is slightly increased.
25 25 25 25 Normal wash 4) ECO wash Sanitation wash Time program 2 2 60 °C 140 °F 60 °C 140 °F 60 °C 140 °F 60 °C 140 °F 50 °C 120 °F 2:20 2:20 1:50 1:30 1.0 1.0 0.8 1.4 1.1 1:50 1:50 1:20 1:00 2:25 0:07 0.6 0.6 0.5 0.9 0.6 0.01 0.4-1.2 0.6 3.2 3.2 2.4 2.6 3.2 0.8 2.9- 5.0 4.0 3.7 3.2 The energy label performance figures are based on this program.
Settings Open the dishwasher's Settings menu To open the dishwasher's Settings menu, press the Navigation button with the mode selector . or until Settings menu is shown on the display and confirm your selection To exit the dishwasher's Settings menu, select Exit and confirm your selection with the mode selector . Navigation buttons for choosing setting Mode selector to confirm current setting START 1� Language Settings English STOP Current setting Settings Options 1.
Settings Options 8. On/Off Super rinse Super rinse adds two extra rinses. Activated in the following programs: Normal wash ECO wash Sanitation wash Plastic wash Lower half Upper half 9. High temperature On/Off Activate the setting High temperature to improve the dishwashing results. Energy consumption is slightly increased. Activated in the following programs: Normal wash ECO wash Sanitation wash Plastic wash Lower half Upper half 10.
Care and maintenance instructions Coarse filter The coarse filter traps larger food particles, which cannot get past the drain pump. Empty the coarse filter as necessary. Top spray arm • The upper basket must be removed before the top spray arm can be released. Extend the upper basket then rotate the basket catch on each runner outward (see illustration). Remove the basket. Coarse filter • Remove the top cutlery tray.
Unblocking the drain pump If the dishwasher still contains water after the program has finished, something may be blocking the drain pump. Such items are easily removed. • Shut off the water. • Unplug the unit from the power outlet. • Call the Customer Care Center. 1 Turn off the machine using the main power switch and unplug it from the power outlet. 2 Remove the coarse filter and the fine filter. 3 Scoop out the water from the dishwasher tub.
Troubleshooting Type of fault on the display Action F10 Overfilling water 1 Clear the drain pump. See the section Care and maintenance instructions. If the problem persists, call the Customer Care Center. F11 Water outlet fault See “Water remains in the dishwasher above the filters” in the table “Problem” below. If the problem persists, call the Customer Care Center. F12 Water inlet fault Check that the water supply valve is on. If the problem persists, call the Customer Care Center.
Problem Possible causes Action The dishes are not clean. The spray arms do not rotate. Check that the dishes are not blocking the spray arms. Spray arm holes or bearings blocked. Clean the spray arms. See the chapter Care and maintenance instructions. Unsuitable dishwashing program. Choose a longer program. Incorrect detergent dosage. Dose according to water hardness. Far too much or far too little detergent can result in poor dishwashing results. Detergent is too old.
Problem Possible causes Action "Program paused" is shown on the display. The dishwasher door has been opened while a The dishwasher door must not be open while a program is in progress. program is in progress according to UL Standards. If you want the dishwashing program to continue, press Start/Stop and close the door within five seconds. If you want to cancel the dishwashing program, press and hold the main power switch until the display turns off. Water remains in the dishwasher above the filters.
Technical information Technical data Height: 34 1/4 - 36 3/8" Width: 24" Depth: 22" Weight: 120 lb (55 kg) 1) Water pressure: 4.2–140 psi Electrical connection: See serial number plate Rated power: 1) 20 See serial number plate Weight can vary due to different specifications.
Service Limited Warranty – Residential Appliances ASKO Distribution North America, LLC. (“ASKO”) warrants to the original purchaser (the “ASKO Customer”) of the ASKO product (the “ASKO Product”), who purchased the ASKO Product from a distributor, dealer, manufacturer’s representative or other seller who has been authorized by ASKO, that this ASKO Product is free of defects in materials and/or workmanship, subject to the terms and conditions set forth herein.
Notes 22
Notes 23
Quick start guide Load the baskets (See page 6.) 1. Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape off large food particles before loading the dishwasher. Check that the spray arms can rotate freely Check also that the water supply valve is on. 2. Don't forget! Empty the coarse filter and clean the fine filter when necessary. (See page 15.
