Use & Care Guide
Table Of Contents
- Front page
- Contents
- Your dishwasher
- Important safety instructions
- Before washing for the first time
- Greener dishwashing
- Loading the dishwasher
- Using the dishwasher
- Add detergent
- The main power switch
- Select program
- Select program mode
- Select option
- Starting the dishwasher
- Time remaining
- Stopping or changing a program
- If you want to load more dishes
- If the dishwasher is turned off due to a power failure
- Once the program has finished
- How to get the best drying results
- Unloading the dishwasher
- Program chart
- Settings
- Care and maintenance instructions
- Troubleshooting
- Installation instructions
- Service
- Technical information
OptionsSettings
For adjusting the contrast of the display.Contrast top dis-
play1/2/3/4
Display settings4.
Setting to hide the logo shown on the dis-
play.
Logo in top display On/Off
This sound is used to confirm each button
press.
0/1/2/3Feedback sound5.
The buzzer indicates when a dishwashing
program has ended.
0/1/2/3Buzzer volume6.
Error messages are always indicated by a
loud buzzer.
Setting for rinse aid dosage. The rinse aid
dispenser can be adjusted between 0 (Off)
and 5 (High dosage).
0/1/2/3/4/5Rinse aid7.
Increase the rinse aid dosage:
• If the dishes have water marks.
Reduce the rinse aid dosage:
• If the dishes have a sticky white/blue
film.
• If the dishes are streaked.
• Heavy foaming. If you have very soft
water, the rinse aid can be diluted 50:50
with water.
Super rinse adds two extra rinses.On/OffSuper rinse8.
Activated in the following programs:
Normal
Eco
Light
Plastic
Upper half
Lower half
To exit the dishwasher's Settings menu, se-
lect Exit and confirm your selection with the
mode selector
.
Exit
Table continued from last page
23
Settings