Use & Care Guide
Table Of Contents
- Front page
- Contents
- Your dishwasher
- Important safety instructions
- Before washing for the first time
- Greener dishwashing
- Loading the dishwasher
- Using the dishwasher
- Add detergent
- The main power switch
- Select program
- Select program mode
- Select option
- Starting the dishwasher
- Time remaining
- Stopping or changing a program
- If you want to load more dishes
- If the dishwasher is turned off due to a power failure
- Once the program has finished
- How to get the best drying results
- Unloading the dishwasher
- Program chart
- Settings
- Care and maintenance instructions
- Troubleshooting
- Installation instructions
- Service
- Technical information
OptionsSettings
Adjusting the water softener. Select a setting
depending on the hardness of the water
supply. It is important that this setting is
correct!
0/1/2/3/4/5/6/7/8/9
Pre-selected at factory: 0
Water hardness9.
Recommend-
ed setting
French wa-
ter hardness
scale
German wa-
ter hardness
scale
00-9°fH0-5°dH
110-14°fH6-8°dH
215-20°fH9-11°dH
321-25°fH12-14°dH
426-34°fH15-19°dH
535-43°fH22-24°dH
644-52°fH25-29°dH
753-70°fH30-39°dH
871-88°fH40-49°dH
989°fH50°dH
Do not forget to put salt in the salt compart-
ment after you have set the water softener
to 1 - 9.
For a water supply with a hardness under
6°dH (9°fH), select 0. The water softener is
deactivated and no salt is needed.
To exit the dishwasher's Settings menu, se-
lect Exit and confirm your selection with the
mode selector
.
Exit
Table continued from last page
25
Settings