User's Manual
Table Of Contents
- Front page
- Contents
- Your dishwasher
- Safety instructions
- Before washing for the first time
- Loading the dishwasher
- Using the dishwasher
- Add detergent
- The main power switch
- Select a program
- Select a program mode
- Select an Option
- Starting the dishwasher
- Time remaining
- Status light™
- Stopping or changing a program
- If you want to load more dishes
- If the dishwasher is turned off due to a power failure
- Once the program has finished
- How to get the best drying results
- Unloading the dishwasher
- Program chart
- Settings
- Care and cleaning
- Troubleshooting
- Technical information
- Installation
- ASKO Service
- Information for test institute
- Your notes
- Quick guide
Quick guide
Load the baskets
1.
(See page 5.)
Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape off
large food particles before loading the dishwasher.
Check that the spray arms can rotate freely
2.
Check also that the water tap is on.
Don't forget! Empty the coarse filter and clean the fine filter when necessary. (See page 14.)
Add detergent
3.
The detergent compartment has one smaller compartment for the prewash and one for the main
wash. (See page 8.)
Open the door and press the main power switch
4.
Check/Add rinse aid
5.
Use rinse aid to achieve good washing and drying results. (See page 4.)
Refill rinse aid indicator.
Select a program, a program mode and any options
6.
(See page 9.)
Press Start/Stop, close the door
START
STOP
7.
Art. No.: 782533. Rev. 07. We reserve the right to make changes.
ASKO APPLIANCES • SOCKERBRUKSGATAN 3, SE-531 40 LIDKÖPING, SWEDEN • WWW.ASKO.COM
28
en (12-19)