User's Manual
Table Of Contents
- Front page
- Contents
- Your dishwasher
- Safety instructions
- Before washing for the first time
- Loading the dishwasher
- Using the dishwasher
- Add detergent
- The main power switch
- Select a program
- Select a program mode
- Select an Option
- Starting the dishwasher
- Time remaining
- Status light™
- Stopping or changing a program
- If you want to load more dishes
- If the dishwasher is turned off due to a power failure
- Once the program has finished
- How to get the best drying results
- Unloading the dishwasher
- Program chart
- Settings
- Care and cleaning
- Troubleshooting
- Technical information
- Installation
- ASKO Service
- Information for test institute
- Your notes
- Quick guide
Screwing the dishwasher into place
(Applicable only to built-in dishwashers.)
2x
After fastening the machine, check that the front feet still touch the
floor.
Screw the dishwasher into place with two extra screws
If there is an air gap of more than 3 mm between the underside of the
worktop and the top of the dishwasher, the dishwasher should be
screwed into place with two extra screws.
2x
KNOCK
OUT
Dishwasher kick panel
The dishwasher is supplied with a kick panel.
Install the sound insulation
(only certain models)
x
x
Install the kick panel
2x
23