Dear Customer, Thank you for choosing this quality product from ASKO. We hope it will meet your expectations and fulfill your needs for many years to come. Scandinavian design combines clean lines, everyday functionality, and high quality. These are key characteristics of all our products and the reason they are greatly appreciated throughout the world. To get the most out of your new dishwasher, we recommend that you read the operating instructions before using it.
CONTENTS FRONT PANEL IMPORTANT SAFETY INSTRUCTIONS BEFORE WASHING FOR THE FIRST TIME LOADING THE DISHWASHER USING THE DISHWASHER SETTINGS CARE AND MAINTENANCE INSTRUCTIONS TROUBLESHOOTING TECHNICAL INFORMATION SERVICE PROGRAM CHART 2 3 4 5 7 10 FRONT PANEL The panel is fitted with touch buttons with audible feedback (see the chapter Settings).
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WARNING! This manual does not cover all possible conditions and situations that may occur. Common sense and caution should always be used when installing, operating, and maintaining any appliance. • Read all instructions before using the dishwasher. • Dishwashers must be electrically grounded. Read the Installation Instructions for details. • Use the dishwasher only for its intended purpose.
BEFORE WASHING FOR THE FIRST TIME WATER SUPPLY The machine can be connected to either a hot (max. 160 °F, 70 °C) or cold water supply. We recommend a cold water supply. The water pressure should be 4.2-140 psi. See also the section Economic dishwashing in the chapter Loading the dishwasher. REFILL RINSE AID INDICATOR When the rinse aid needs topping up, the above symbol lights on the display. PROGRAM KEY NOTE! Some dishwashers include program keys in different languages.
LOADING THE DISHWASHER ECONOMIC DISHWASHING Run programs only with a full load Wait until the dishwasher is fully loaded before running a program, this way you save energy. Use the Rinse & Hold program to rinse the dishes if there are any unpleasant odors while you wait for the dishwasher to become fully loaded. Run programs at a lower temperature If the dishes are only lightly soiled, you can select a lower temperature with certain programs.
UPPER BASKET LOWER BASKET Place glasses, cups, bowls, side plates, and saucers in the upper basket. Wine glasses are placed on the wine glass shelf and knives are placed in the knife stand on the right (if equipped). Place plates, side plates, serving dishes, pots, and cutlery (in the cutlery basket) in the lower basket.
USING THE DISHWASHER CUTLERY BASKET ADD DETERGENT Place cutlery with the handles facing down, except for knives, and spread them out as much as possible. Ensure that spoons do not stack inside each other. The cutlery basket is best placed in the middle at the front of the lower basket to best utilize dishwashing performance from the unique spray nozzle (Power Zone™ Cutlery), which is intended for the cutlery basket.
Recommended detergent amounts based on water hardness Water hardness Detergent amounts Soft (0-3 grains per gallon) Prewash 1 teaspoon Main wash 1 to 1-1/2 tablespoons Medium (4-8 grains per gallon) Prewash 1 teaspoon Main wash 1 to 2 tablespoons Hard (9+ grains*) Prewash 1 teaspoon Main wash 2 to 3 tablespoons Daily wash A program suitable for day-to-day dishwashing. This program can also clean dried leftovers, but is not intended for burnt food, such as on oven dishes.
You can vary the temperature as shown below: Heavy wash: 130 °F (55 °C) / 160 °F (70 °C) Normal wash: 130 °F (55 °C) / 150 °F (65 °C) Daily wash: 140 °F (60 °C)/150 °F (65 °C) Quick wash: 85 °F (30 °C) / 140 °F (60 °C) Super Quick wash: 85 °F (30 °C) / 140 °F (60 °C) Delicate wash: 105 °F (40 °C) / 120 °F (50 °C) Eco wash: 120 °F (50 °C) / 140 °F (60 °C) Long dry A higher temperature in the final rinse and a longer drying phase improves the drying result if you activate the Long dry option.
SETTINGS DO AS FOLLOWS TO OPEN THE SETTINGS MENU: + 1. First, open the door. Turn off the dishwasher using the On/Left-on mode button (press and hold). Release the button. 2. Press and hold the On/Left-on mode button until the display lights up. 3. Within five seconds, press and hold the Program selector and the Long dry button. 4. Release the buttons when the display shows . TIP! Be sure to press right on the symbols, so as not to inadvertently activate any other button.
Button press Options (Off) Settings Description Operation volume This sound is used to confirm each button press. (Low) (High) Press Start/Stop to save the setting value and continue to the next setting. LCD contrast (Display on the front of the door) For adjusting the contrast of the display on the front door. Press Start/Stop to save the setting value and continue to the next setting. (Low) LCD contrast (Display on the panel) For adjusting the contrast of the display on the panel.
CARE AND MAINTENANCE INSTRUCTIONS COARSE FILTER The coarse filter traps larger food particles, which cannot get past the drain pump. Empty the coarse filter as necessary. 1 Lift the coarse filter by the handle. 2 Empty the coarse filter. Remember to replace it! NOTE! The dishwasher must not be used without the filters in place! Dishwashing results may be affected if the coarse filter is incorrectly fitted. DRAIN PUMP The pump can be accessed from inside the dishwasher.
2 Remove any debris using a needle, toothpick, or some other similar pointed device. The spray arms also have holes underneath. DOOR When cleaning the edge around the door, use only a slightly damp cloth (with a little cleaner if necessary). WARNING! Do not use a spray bottle or the like around the door lock. This is to ensure that water does not penetrate the door catch and come into contact with the electrical components. UPPER SPRAY ARM 1 Pull out the basket.
TROUBLESHOOTING Display Type of fault Action Overfilling Call the Customer Care Center. Water outlet fault See "Water remains in the dishwasher above the filters" in the table below. Water inlet fault Check that the water supply valve is on. Inlet valve leakage Turn off the water supply valve and call the Customer Care Center. Turn off the machine with the On/Left-on mode button and then turn it on again to clear the error message from the display.
Problem Possible causes Action The dishwasher does not start. The Start/Stop start button has been pressed Press and hold Start/Stop until the display for too short a time. shows (the door open symbol). This indicates that the dishwasher is ready to start. The door is not properly closed. Check. A fuse/circuit breaker has been tripped. Check. The plug is not plugged into the power outlet. Check. The water supply valve is turned off. Check. Overflow/leaks. Check.
Problem Possible causes Action The touch buttons do not react when pressed. You have pressed the touch buttons too soon Wait a moment then try again. after opening the door. Dirt on the touch buttons. Clean with a dry or slightly damp cloth. Open the door until the display lights up. If this symbol appears on the display, the door is not open enough. Child lock (button lock) activated. 16 Customer Care Center 1-800-898-1879 www.askona.com See the section Settings.
TECHNICAL INFORMATION TECHNICAL DATA Height: Width: Depth: Weight: Water pressure: Electrical connection: Rated power: 1) 34-3/8" - 36-1/2" (873-927 mm) 24" (610 mm) 22-7/8" (581 mm) 110 lb (50 kg) 1) 4.2–140 psi See serial number tag and rating plate. See serial number tag and rating plate. Weight can vary due to different specifications. Customer Care Center 1-800-898-1879 www.askona.
SERVICE LIMITED WARRANTY – RESIDENTIAL APPLIANCES ASKO Distribution North America, LLC. (hereinafter “ASKO”) warrants the original purchaser (the “ASKO Customer”) of the ASKO product (the “ASKO Product”), who purchased the appliance from a distributor, dealer, manufactures representative or other seller who has been authorized by ASKO (“Authorized ASKO Dealer”), that this ASKO Product is free of defects in material and workmanship, subject to the terms and conditions set forth herein.
1 - - Delicate wash Eco wash The energy label performance figures are based on this program. 0:04 0:40 Connection to hot water, approx. 120 °F (50 °C). 0.01 0.5 2:20 1:30 0:15 0:20 1:40 2:10 2:00 3:10 4) 0:06 0:50 0.9 0.8 0.2 0.2 1.4 1.6 1.0 1.5 Connection to cold water, approx. 50 °F (10 °C).
QUICK GUIDE 1. LOAD THE BASKETS (SEE PAGE 5) 2. CHECK THAT THE SPRAY ARMS CAN ROTATE FREELY 3. ADD DETERGENT (SEE PAGE 7) 4. PRESS AND HOLD THE ON/LEFT-ON MODE BUTTON UNTIL THE DISPLAY LIGHTS UP 5. SELECT A PROGRAM AND ANY OPTIONS (SEE PAGE 8) 6. PRESS AND HOLD START/STOP AND CLOSE THE DOOR (SEE PAGE 9) Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape off large food particles before loading the dishwasher.
