Operating instructions

Do as follows to open the settings menu:
Turn off the dishwasher using the main power switch. Wait about five seconds.1.
Then press the main power switch again. Wait until the numbers appear in the right-hand display
before continuing to the next step.
2.
Within five seconds, press and hold the Program selector (wait for the audible signal confirming the
button press) and then immediately press the Long dry button without releasing the Program selector.
3.
PROG PROG
+
Keep the buttons pressed until the symbols for the Daily wash and Rinse & Hold programs start to
flash.
4.
TIP!
Be sure to press right on the symbols, so as not to inadvertently activate any other button. Try
again if you fail to open the settings menu the first time.
P R O G
START
ST OP
START
Press to save the setting value and continue
to the next setting.
Current setting.
Current setting value.
Press to browse between setting values.
Display
You can now adjust the following settings:
DescriptionSettingsOptionsButton
press
You can activate the child lock (button lock)
option to prevent children from starting the
dishwasher.
Press the High temperature and Long dry
buttons simultaneously to temporarily deacti-
vate the button lock when you want to start
the dishwasher. The button lock is automati-
cally reactivated after 2 minutes.
Child lock
(button lock)
(Off)
(On)
Press Start to save the setting value and continue to the next setting.
If you do not want to change any other settings, keep pressing Start to step through the entire settings
menu.
17Customer Care Center
1-800-898-1879
www.askousa.com
Settings