Specifications

Page 62 of 68
Warranty Guidelines
The Developer’s warranty guidelines for active components, such as exhaust fans, are discussed
under the appropriate headings (electrical systems, heating system, and so on). Please review
these sections for more information regarding same.
Damage caused by humidity is not covered by a home warranty. If the homeowner fails to
follow the recommendations noted above, he/she will cause damage to the home - for
which the homeowner will be held accountable! Further, in several instances, failure to
comply with the recommended daily living habits will render the Developer’s entire
warranty null and void.
Windows
Homeowner Use and Maintenance Guidelines
Contact either the building manager or the property management company if a suite window
breaks. They will be able to assist you in remedying same (accidental breakage may be covered
by the strata building insurance). Please refer to the “Emergency Contacts” section of this Manual
for building/property manager phone numbers.
To care for your windows, please review the following:
Vinyl, if applicable
Clean vinyl surfaces with warm, clear water. Do not use powdered cleaner. After each cleaning,
apply a silicone lubricant. Clean glass as needed with vinegar and water, a commercial glass
cleaner, or the product recommended by the window manufacturer.
Condensation
Condensation on interior surfaces of the window and frame is the result of high humidity within the
home and low outside temperatures. Your family’s lifestyle controls the humidity level within your
home. If your home includes a humidifier, closely observe the manufacturer's directions for its use.
You may also review the sections on “Ventilation” and “Condensation” (see table of contents) for
tips on reducing in-suite condensation.
Sills
Window sills in your home are made of ultra lite. The most common maintenance activity is
dusting. Twice a year, check caulking and touch-up as needed. Protect sills from moisture. If you
arrange plants on a sill, include a plastic tray under the pot.
Sticking Windows
Most sliding windows (both vertical and horizontal) are designed for a 10-pound pull. If sticking
occurs or excessive pressure is required to open or close a window, apply a silicone lubricant.
This is available at hardware stores. Avoid petroleum-based products.
Tinting
Applying tinting and/or foil lining to dual pane windows can result in broken windows due to heat
build-up. Some manufacturers void their warranty on the windows if you apply tinting or foil lining.
Contact the manufacturer to check on their current policy before you apply such coatings.
Weep Holes
In heavy rains, water may collect in the bottom channel of window frames. Weep holes are
provided to allow excess water to escape to the outside. Keep the bottom window channels and
weep holes free of dirt and debris.