Specifications

Page 34 of 68
Home Components
All telephone and web numbers noted in this section were accurate and up to date at the
time of printing. This Manual was printed in March of 2009.
If the care/warranty information in this Manual contradicts the manufacturer/trade
information, please defer to the latter. The Developer is not responsible for the accuracy or
completeness of this Manual, and no legal commitment or obligation shall arise by reason
of the Manual or its contents.
The Developer reserves the right to substitute any products with an equivalent or better
specification.
Alarm System Pre-Wiring
Homeowner Use and Maintenance Guidelines
All residential suites have been pre-wired to facilitate the installation of a security system. The
pre-wiring consists of a Cat5e/18awg two conductor cable from the keypad to the multi-media
enclosure. This allows wireless door contacts and motion detectors to be installed throughout
your townhome, with the keypads hardwired to the control power. The power outlet for the control
panel/telephone line connection (for off-site monitoring of the system) is located in the multi-media
enclosure. For more information, please refer to the “Smart-Tek In-Suite Security Rough-In
Sheet” that was included in your Welcome Package.
We have also included an alarm installation/monitoring quotation in your Welcome Package. It is
titled “Smart-Tek Security System Quotation”. Please note the homeowner is responsible for all
alarm installation/monitoring costs.
Please remember to test your alarm on a regular basis once a month is a good rule of thumb.
The Developer makes no representation that an alarm system will provide the protection for which
it is installed or intended.
Appliances
Homeowner Use and Maintenance Guidelines
For appliance use and care information, please refer to the product manuals included in your
Welcome Package. Where information in this manual contradicts information in the product
manuals, please defer to the latter.
Please remember to clean your dryer lint traps after every use. Failure to do so may create a fire
hazard and/or poor performance of the dryer.
Initial Orientation and Warranty Guidelines
During your initial orientation, the Developer confirms that all appliances are in acceptable
condition. The Developer is not responsible for repairs to appliances after title is
transferred.
Fitzsimmons Walk’s appliances were supplied by Trail Appliances, ECM (Espresso Coffee
Machines Company) and Jackson Grills. Trail Appliances provided all of the appliances, with the
exception of the coffee machine and barbeque. These appliances were procured from ECM and
Jackson Grills respectively.