Owner's Guide

31
Customer Care Center, 1-800-898-1879, www.askousa.com
CLEANING THE HEAT PUMP FILTER
Before cleaning, make sure to switch off the appliance and disconnect it from the power mains (unplug
the power cord from the outlet).
1
During cleaning, some water may be spilled. It is
therefore recommended to place an absorbent
cloth on the fl oor.
Open the outer cover.
2
Hold the levers on the inside cover and rotate
them upwards.
Remove the inside cover.
3
Use the handle to pull out the heat pump fi lter.
4
Push the foam part of the heat pump fi lter from the
housing. Wash it under running water and dry it
before replacing it in the fi lter housing.
The fi lter may be washed in the washing machine,
with the rinse program on low spin speed. Dry the fi lter
before replacing it in the fi lter housing.
Clean the foam fi lter at least after every 5 drying
cycles.
5
Use a soft dry cloth to also clean the heat pump
fi lter housing and net.
Lower part of the hosing contains a strainer which
shall be cleaned thoroughly.
Clean the heat pump fi lter housing and net after
each drying cycle.