Installation instructions

ManualsBrandsAsko ManualsDishwashers491289

Installation Instructions

Outdoor dishwasher

INTRODUCTION ......................................................................................................................... 2

WHAT YOU NEED ...................................................................................................................... 2

SAFETY INSTRUCTIONS ............................................................................................................ 3

BEFORE STARTING THE INSTALLATION .................................................................................. 3

UNIT DIMENSIONS .................................................................................................................... 4

PREPARING THE LOCATION ..................................................................................................... 4

EASYINSTALL CONNECTIONS .................................................................................................. 5

WATER SUPPLY .......................................................................................................................... 5

DRAIN CONNECTIONS .............................................................................................................. 6

ELECTRICAL CONNECTIONS ................................................................................................... 7

PREPARING THE DISHWASHER FOR INSTALLATION .............................................................. 8

MOVING THE MACHINE INTO PLACE ...................................................................................... 9

CONNECTING THE ELECTRICAL CABLE ............................................................................... 10

CONNECTING THE WATER SUPLY ......................................................................................... 10

INSTALLATION CHECKLIST ..................................................................................................... 12

CONTENTS

IMPORTANT!

READ ALL OF THESE INSTRUCTIONS BEFORE INSTALLING THE DISHWASHER.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

492183_492185 Install DW Outdoor USA EN Rev 02.indd 1 2016-01-08 11:19:35

Summary of content (12 pages)

PAGE 1
Installation Instructions Outdoor dishwasher CONTENTS INTRODUCTION.......................................................................................................................... 2 WHAT YOU NEED....................................................................................................................... 2 SAFETY INSTRUCTIONS............................................................................................................. 3 BEFORE STARTING THE INSTALLATION.......................
PAGE 2
INTRODUCTION Read these instructions carefully and completely before you install the machine. The installation should be carried out by a qualified person who is familiar with all local codes and ordinances for electrical and plumbing connections. NOTE: Cosmetic damage must be reported to the ASKO dealer within five days from the date of purchase. As soon as you unpack the dishwasher, thoroughly check it for cosmetic damage. WHAT YOU NEED TOOLS 1) Phillips No.
PAGE 3
SAFETY INSTRUCTIONS • It is important that you closely follow the instructions provided here. • An incorrect or defective installation can lead to higher consumption of energy, water and dishwashing detergent, which can lead to higher costs and poor cleaning results. • Plumbing and electrical installations must be carried out by qualified professionals.
PAGE 4
UNIT DIMENSIONS Technical Data U.S. Metric Electricity 120 V, 60 Hz, 15 amp Height (Adjustable) 35˝ to 35-3/4˝ 889 to 908mm Water pressure Width 24-5/8˝ 625 mm Depth (Includes high loop) 25˝ 635 mm 4.2 - 140 psi, 0.03-1.0 MPa, 0.3-10 Bar DepthW/handle 27˝ 686 mm Heating element 1200 watt Max loading 1300 watt Depth W/Door Open 51-5/8˝ 1311 mm Weight 163 Ib 74 kg 27" 686 mm 24-5/8" 625 mm 51-5/8" 1311 mm Reverse hose within the high loop bracket to accommodate a left side drain.
PAGE 5
EASYINSTALL CONNECTIONS PEX tubing with 3/8˝ compression fitting PEX tubing has a 95-year spec life. Fits American dishwasher water supply valves. Be sure to install the O-Ring which is attached to the PEX tubing in a plastic bag Electrical cord 120 volts, 15 amp cord is supplied with the dishwasher. WARNING! Risk of electric shock. Do not use an extension cord for this appliance. Drain hose boot Ready to be cut to desired drain connection. Only one clamp required.
PAGE 6
DRAIN CONNECTIONS ASKO provides a 7/8˝ (22 mm) diameter corrugated drain hose which is connected to the back of the unit to form a high loop. NOTE: Do not use any fittings anywhere in the drain line that are less than 7/8˝ (22 mm) OD. THREE WAYS TO INSTALL DRAIN CONNECTIONS A) Typical connection to sink plumbing before trap (high loop drain) The access hole for the drain line should be 1-5/8˝ (41 mm)2˝ (50mm) max.
PAGE 7
ELECTRICAL CONNECTIONS CORD-CONNECTED APPLIANCE WARNING! Before working on wiring for any electrical appliance, be sure the electrical power has been turned off at the breaker/fuse box. WARNING! Disconnect the electrical power supply and place a tag at the disconnect switch indicating that you are working on the circuit. GROUNDING INSTRUCTIONS This appliance must be grounded.
PAGE 8
PREPARING THE DISHWASHER FOR INSTALLATION At this point the styrofoam, plastic wrap, and the wood pallet (base) should be removed from the dishwasher. Now is an excellent time to inspect for any shipping damage. Should you find any damage, you should report it to your dealer or builder immediately. Be sure to remove the transport protection for the door when unpacking the dishwasher.
PAGE 9
MOVING THE MACHINE INTO PLACE 1. Position the machine in front of the cabinet opening. 2. Push the plastic feet into place on all steel feet (included in document bag). (Only certain models.) 3. Start by measuring the height from the floor to the bottom edge of the counter top. Measure the height from the floor to the top edge of the dishwasher. 4. Loosen the lock nuts on the dishwasher’s steel feet using a 5/8˝ (16 mm) open-ended wrench. Screw the lock nuts down as close to the floor as possible. 5.
PAGE 10
CONNECTING THE ELECTRIC CABLE If the cord is not long enough, or if a hard-wire installation is needed, follow the steps below to complete the electrical connection. 4. Connect ground wire to ground connection screw on the bottom. WARNING! Before starting this procedure, be sure the power is turned off at the breaker/fuse box. 1. Connect supply cable with a UL-listed strain relief bushing (if nonmetallic cable is to be used).
PAGE 11
NOTES CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.
PAGE 12
INSTALLATION CHECKLIST ASKO - DISHWASHER Appliance Installation Checklist • Remove packaging and check for cosmetic damages. • Remove the information packets from inside the dishwasher. • Attach the drain line using the largest section of the disposer boot allowable. Leave the high loop in place. • Attach the PEX fill hose. Don’t forget to use the O-ring. • Plug the dishwasher into the wall. • Turn on the water and check the fill line connections for leaks.