Quick Installation Guide

Askey SFE3160S CBSD

Version 1.0 March 1, 2020

3. Quick Setup

1) Connect your SFE3160S CBSD SmallCell to the Internet

Connect the yellow Ethernet cable from the “WAN” yellow

port on your SFE3160S to an available Ethernet port on your

switch or cable modem.

2) Power on your SFE3160S CBSD SmallCell

Connect the power cable to the SFE3160S power port, then

plug in your AC power adaptor into the power outlet.

3) Let your SFE3160S CBSD SmallCell setup

After you power on your SFE3160S, the SFE360S will go

through the setup process till LTE service is ready with

the following LED state:

• POWER (Solid Blue): Power on. Device self-testing and

update complete.

• STATUS (Solid Blue): LTE service ready

• SERVICE (Solid Green): LTE service ready

NOTICE:

GPS ANTENNA IS OPTIONAL IN

THIS DEMONSTRATION WHERE GPS

LOCATION HAS BEEN PRESET ON THE

SMALLCELL FOR TESTING PURPOSE.

NOTICE:

FOR THE CBSD SMALLCELL

DEMO SETUP. IT IS REQUIRED TO HAVE

CONNECTION TO INTERNET VIA

ETHERNET WHERE IPSEC PASSTHROUGH

IS ENABLED, I.E. PORT 500, PORT 4500

ARE *NOT* BLOCKED BETWEEN

SFE3160S CBSD SAMMCELL WAN PORT

AND THE INTERNET.