User's Manual

Page: 6
3. Connect AP5660W to Router LAN port by Ethernet. And wait LED from
“Blue blinking” to “Blue solid”.
4. Power on other AP5660W(default is RE) and wait LED to “Green solid”.
5. Press AP5660W(CAP) WPS button.(Green and Blue LED alternate
blinking).
6. Press AP5660W(RE) WPS button.(Green and Blue LED alternate
blinking).
7. When AP5660W(RE) LED is Blue solid, AP5660W(RE) is registered and all
is well.
8. On the AP5660W(CAP) Web GUI, you can see the devices connected to
your Mesh Network.
[CAP] refers to your AP5660W(CAP mode).
[RE] refers to the extender.
[STA] refers to the Desktop/Laptop/Mobile connected to your device or extender through
SSID and Password.