User's Manual

PAGE 31
transmitter, except in accordance with FCC multi-transmitter product procedures.
The end user has no manual instructions to remove or install the device and a separate approval is
required for all other operating configurations, including portable configurations with respect to
2.1093 and different antenna configurations.
Maximum antenna gain allowed for use with this device is 2.3 dBi.
When the module is installed in the host device, the FCC ID label must be visible through a
window on the final device or it must be visible when an access panel, door or cover is easily
re-moved. If not, a second label must be placed on the outside of the final device that contains
the following text: “Contains FCC ID: 118N-WWIlOOll”.
R&TTE Regulation:
In all cases assessment of the final product must be mass against the Essential requirements of the R&TTE
Directive Articles 3.1(a) and (b), safety and EMC respectively, as well as any relevant Article 3.3 requirements.
The maximum antenna gain for frequeny 900 is 2.18 dBi; for frequeny 1800 is 3.45 dBi and the antenna separation
distance is 20cm.