ASKEY 802.
1. Description WPA5151 is an 802.11b/g/n dongle that provides wireless connectivity to an existing printer. The product is put into the printer to connect with Wireless AP Router and user, while any user need to be printing any documents through wireless, WPA5151 is better choice for use. The connect diagram as below: 2. Physical Installation The WPA5151 uses a unique connector and mounting technique that only allow it to connect to EPSON compatible printers.
. Product Spec. Form factor Chipset Operation Voltage Network Standards Modulation Techniques Modulation Technology Data Rate Network Architectures Operating Frequencies Antenna Type Operating Channels RF Output Power Receiver sensitivity (PER < 10%) Power Consumption Security Software Support Temperatures (AMBIENT) Humidity (non-condensing) Unsupported operation Manufacturer ID Product ID 802.11b/g/n Dongle Broadcom BCM4319 3.0VDC ~ 3.6VDC IEEE 802.
. Setup Operation Refer to operating manual of the printer for how to configure the wireless connection.
USA - Federal Communications Commission (FCC) FCC Radiation Exposure Statement CAUTION: • The radiated output power of WiFi Module 802.11bgn devices is far below the FCC radio frequency exposure limits. Nevertheless, WiFi Module 802.11bgn devices should be used in such a manner that the potential for human contact during normal operation is minimized.
Canada. Industry Canada (IC) This device complies with RSS210 of Industry Canada. CAUTION: Exposure to Radio Frequency Radiation. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population. Consult Safety Code 6, obtainable from health Canada’s website www.hc-sc.ca/rpb.
