User's Manual

Be aware of the following limits before using the Wireless LAN Adaptor.
●To use the Wireless LAN Adaptor, an access point needs to be obtained.
●It is recommended to use the Wireless LAN Adaptor with the supplied extension cable.
●Do not use the Wireless LAN Adaptor to connect to any wireless network (SSID∗) for which you
do not have usage rights. Such networks may be listed as a result of searches. However, using
them may be regarded as illegal access.
∗SSID is a name for identifying a particular wireless network for transmission.
●Do not subject the Wireless LAN Adaptor to high temperatures, direct sunlight or moisture.
●Do not bend, or subject the Wireless LAN Adaptor to strong impacts.
●Do not disassemble or alter the Wireless LAN Adaptor in any way.
●Do not attempt to install the Wireless LAN Adaptor in any incompatible device.
●Do not remove the Wireless LAN Adaptor from the TV’s USB port during operations.
●Data transmitted and received over radio waves may be intercepted and monitored.
●To avoid malfunctions caused by radio wave interface, keep the TV away from the devices
such as other wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz
signals when using the Wireless LAN Adaptor.
●When noises occur due to the static electricity, etc., the TV might stop operating for the
protection of the devices. In this case, turn the TV Off with Mains power On / Off switch, then turn
it On again.
●Depending on the area, this Wireless LAN Adaptor may not be available.
Caution