User's Manual

ManualsBrandsAskey Computer ManualsElectronicsUSB WLAN Module

WLAN USB Module

WLU5053-D4(ROHS)

Quick Setup Guide

V1.0

Askey Computer Corp. WLU5053-D4(ROHS)

Features

 Compatible with IEEE802.11a/b/g/n

How to use this WLAN USB module

1. Install the module to the Host device. (TV or printer or other mobile device)

2. Turn on the power of the Host device. (TV or printer or other mobile device)

3. From the PREFERENCES menu, highlight Network Setup and press .

4. Press  or  to highlight Network Type, and then press  or  to select

Wireless connection, and press .

Note: If WLAN USB module is not connected, Wireless cannot be selected.

Summary of content (5 pages)

PAGE 1
WLAN USB Module WLU5053-D4(ROHS) Quick Setup Guide V1.0 Askey Computer Corp. WLU5053-D4(ROHS) Features  Compatible with IEEE802.11a/b/g/n How to use this WLAN USB module 1. 2. Install the module to the Host device. (TV or printer or other mobile device) Turn on the power of the Host device. (TV or printer or other mobile device) 3. 4. From the PREFERENCES menu, highlight Network Setup and press .
PAGE 2
Wireless Setup Note: • This feature is grayed out when the WLAN USB module is not connected or Network Type is disconnect. • Do not remove the WLAN USB module while changing the settings of the wireless connection or communicating. There are 3 connection method on “Wireless connection” for wireless setup: •Easy Setup (WPS) If AP corresponds to WPS, this can be used. WPS (Wi-Fi Protected Setup™) is standard designed to execute connection of wireless LAN equipment and setup of security easily.
PAGE 3
This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna General Information for 2.4G No. Ant. Cat. Ant.
PAGE 4
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 5
Industry Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.