User's Manual

Chapter 5: Web Configuration
21
running the risk of allowing some unauthorized wireless LAN cards that have the capability of eavesdropping your
SSID to associate itself to the device.
Turns on encryption. Wired Equivalent Privacy Mechanism is Turns on. You should select the encryption key length
as 64- or 128- bit key. Then enter the encryption key in Key Entry fields.
Note: When Wired Equivalent Privacy Mechanism is enabled, the wireless client must be
configured with exactly the same encryption level (64 or 128-bit) and encryption key as
identified in the wireless LAN card, so that access to the unit is allowed.
IP Address
This page allows you to set the IP address for wireless LAN card for connecting to the network.
IP Address: Enter the IP address for the wireless LAN card..
IP Subnet: Enter the IP Subnet address that you get from your ISP.
IP Gateway: Enter the IP Gateway address that you get from your ISP.
Device name: Enter the name for the wireless LAN card for identification while connecting to some
other wireless access points. This is an optional setting.
Allow firmware upgrade: This is use to update firmware by using this web page, simply check the box and click
Apply. For normal operation, please uncheck this item.
Stations
This page shows the information of the devices, stations that the wireless LAN card is connected. It is just for
reference. You can refresh this page for getting the newly information at any time.