User Manual

Atheros Communications, Inc. • 8
COMPANY CONFIDENTIAL November 2011 • 8
6. Select the Configuration hotlink from the navigation menu.
The System Configuration window appears.
7.
Enter the SSID (name or address) for the AP in the SSID field. The SSID must be 1–32
characters in length.
To configure a single SSID to have more than one AP in a single SSID, specify a unique
System Name for each AP within that single SSID. Note that range of available channels
will be automatically determined by factory settings.
8. Click Update to commit the changes.
Change other settings at this time. Refer to Appendix A for more information.
9. After all configuration changes are complete, reboot the AP to enable them. To reboot the
AP, click on the REBOOT AP button that appears.