User Manual

Atheros Communications, Inc. • 6
COMPANY CONFIDENTIAL November 2011
AP Initial Configuration
Configure the AP for its Service Set Identifier (SSID) unique to the application. This
configuration can be done either through a web browser with access to the built-in AP web
server, or by issuing commands through the command line interface (CLI).
Web Browser
Follow these steps to configure the channel frequency and SSID using a web browser:
1. Launch a web browser (Netscape Navigator or Internet Explorer are examples of
commonly used web browsers).
2. From the HPC, enter the IP address that is assigned to the AP as the URL address, for
example http://192.168.1.1.
The Access Point Web Server homepage will appear.
3. Select the Access Point Web Server hotlink.