User Manual

Chapter 2 Installing the Wireless LAN Card

3. When the welcome screen pops up, click Next.

4. Upon hardware detection, Windows OS hardware wizard will appear requesting for the

driver. Just follow the on-screen instructions to proceed.

5. Click Finish when the following screen appears.

Now you are done with the installation procedure. The provided Broadcom Wireless

Configuration Utility should be launched automatically with its icon appearing on the right

side of the taskbar. Proceed to next chapter to configure or fine-tune your Wireless LAN Card

settings.

Note: If you need to set up the TCP/IP address or the subnet mask, refer to “Appendix C

Setting Up TCP/IP” for details.