User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Installing the Driver and Utility Software
- Chapter 3 Station Configuration
- Accessing the Atheros Configuration Utility
- Basic Configuration for Ad Hoc Network
- Basic Configuration for Infrastructure Network
- Edit the Security Tab
- Edit the Advanced Tab
- To Connect to an Existing Network
- To Modify a Configuration Profile
- To Remove a Configuration Profile
- To Switch to a Different Profile
- Chapter 4 Checking Status or Statistics
- Chapter 5 Tools
- Chapter 4 Uninstalling the Wireless LAN Card
802.11a/b Mini PCI Wireless LAN Card User's Manual
34
If no configuration profile exists for an available network, you can double-click on the
network name to create a configuration profile for that network.
If a configuration profile exists for an available network, you can double-click on the network
name to connect an available network.
The following table describes the items found on the WLAN Status screen.
Screen Item Description
Network Name (SSID) The wireless network name (service set identification).
Signal Strength The received signal strength indicator. Displays the signal
strength in dB.
Wireless Mode Displays the wireless mode.
Channel The channel the station is using.
Frequency The frequency the station is using.
Address (BSSID) The network AP address (basic service set identification).