User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Installing the Driver and Utility Software
- Chapter 3 Station Configuration
- Accessing the Atheros Configuration Utility
- Basic Configuration for Ad Hoc Network
- Basic Configuration for Infrastructure Network
- Edit the Security Tab
- Edit the Advanced Tab
- To Connect to an Existing Network
- To Modify a Configuration Profile
- To Remove a Configuration Profile
- To Switch to a Different Profile
- Chapter 4 Checking Status or Statistics
- Chapter 5 Tools
- Chapter 4 Uninstalling the Wireless LAN Card
Chapter 2
7
System Requirements
To use the Wireless LAN Card, your computer must meet the following minimum
requirements:
Windows 98
/Me
/2000
/XP
32 MB memory or greater
300 MHz processor or higher
Installing Wireless LAN Driver and Software
If your operation system has not been installed with the Wireless LAN Card driver, the
Windows Plug-and-Play capability will automatically detect the new device (e.g., Ethernet
Controller) and display the wizard requesting for drivers. Click Cancel to bypass the wizard
screen and then take out the steps below.
1. Close all Windows programs that are running.
2. Insert the provided Software Utility CD into your CD-ROM drive. Run Setup.exe from
the Software Utility CD to launch the setup program.