User's Manual

7.7 The Exit Menu
Once you have made all of your selections from the various
menus in the Setup program, you should save your changes and
exit Setup. Select Exit from the menu bar to display the following
menu:
Pressing the [Esc] key can be used to close an open menu or submenu.
Pressing it again saves the current parameters and reboots the
computer.
Each of the options on this menu is described below.
Exit Saving Changes
Once you are finished making your selections, choose this option
from the Exit Menu to ensure the values you selected are saved to
Non-Volatile RAM. Changes you made to the Setup program
must be changed to Non-Volatile RAM in order to make them
operative. Non-Volatile RAM differs from standard RAM
memory in that it is sustained by an on-board battery and stays on
even when the Notebook is turned off.
Once your selections have been saved, the Setup program asks
you to confirm your choice, and then reboot the computer.
System will reboot if OK is selected and will stay in Setup if
Cancel is selected.