User's Manual

5.1.3.6 The Bridge Battery
In the event that you are working on battery power and your
battery dies, the built-in “bridge battery” gives you 3 minutes
time to either plug into an AC power supply or switch to a new
battery.
First, you must enter the sleep mode (this model computer does
NOT support hot-swapping the battery while the computer is up
and running normally; hot swapping a battery could result in an
immediate shut down and the loss of data.)
Next, slide the battery pack out, then insert a fresh battery. The
bridge battery ensures that you do not lose any data while your
computer is in sleep mode during this time without a battery.
The battery used in this computer may present the risk of
harm or damage to you or your computer if mishandled.
• Do not disassemble, incinerate, or otherwise short out
the external contact points.
• Dispose of a used battery properly.
• Do not put the battery in extreme heat, such as a fire.
If you must replace the bridge battery, please contact your sales
representative.