User's Manual

4.1.3 Installing PC Cards
PC Cards may be 'hot-swapped', which means you can install a
card while your notebook is running. The card will be detected
automatically.
Usually PC Cards have a mark or symbol to show which end to
insert into the slot. Cards are keyed to prevent incorrect insertion.
Check the documents that came with your card if the orientation
is unclear.
1. Hold the card with its orientation symbol pointing into the
slot and the topside of the card facing up. The push-button
latch may need to be in before inserting the card.
2. Slide the card into the slot until it clicks into the connector.
3. If you encounter too much resistance, do not force the card.
Check the card orientation and try again.
Your notebook will recognize most PC Cards and automatically
load the appropriate device driver. If the configuration program
tells you to load the manufacturer's drivers, use the floppy disk or
CD that came with the PC Card.