User's Manual

3.2.3 Setting a Password
To provide extra protection for your data and documents, it is
advisable to set a password.
As your notebook is booting (starting up), press F2 to take you to
the BIOS Setup Utility. Use the right arrow key to highlight
Security.
Use the down arrow key to select: Set Supervisor Password…
[Enter]. Press Enter.
Type your password, press Enter and re-type to confirm. Press
Enter. Your changes will be saved. Press Enter to continue.
To enable password protection, use the down key to select
Password Required to Boot. Press Enter. To turn on password
protection, use the down key to select Enabled; to turn password
protection off, select Disabled. Press Enter.
Use the right arrow key to select Exit. Your notebook will now
boot as normal.