User's Manual

Controller. The following dialog box will appear.
2.
Click
Open
.
3.
The setup program will launch. Follow the screen-by-screen instructions
instructions to install the driver.
4. When prompted, select "Yes, I want to restart my computer now." Click
Finish
to complete the installation. Your computer will restart with the
new driver properly installed.
Top
BIOS Update
1.
Insert a bootable floppy diskette into the FDD.
2.
Click on the Start menu and select Windows Explorer.
3.
Select "My Computer".
4.
Open the Bios folder on the CD-ROM.
5.
Select each of the files in the BIOS folder. Right click
Send To
and then
then choose 3½
Floppy
.
6.
Boot laptop computer from the floppy diskette mentioned in Step 1.
7.
Make sure the AC adapter is connected and run the
CBIOS rom_file
from the DOS prompt.
8.
The program will start to update BIOS and reboot automatically.
9.
Press F2 to enter BIOS Setup Menu then press F9 to load default
settings of factory. Press F10 to save settings and exit.
If, for some reason, you cannot access the Driver Installation Guide,
you can also launch any of the setup programs in the following way:
第 8 頁，共 10 頁Driver Installation
2003/6/10
file://C:\WINDOWS\TEMP\~hhD724.htm