User's Manual

Protect the exposed end of an installed card. If the end of the card is
struck, the system board may be damaged.
Always remove an extended PC Card before packing your notebook in
its carry case.
Top
Installing PC Cards
PC Cards may be 'hot-swapped', which means you can install a card
while your notebook is running. The card will be detected automatically.
Usually PC Cards have a mark or symbol to show which end to insert
into the slot. Cards are keyed to prevent incorrect insertion. Check the
documents that came with your card if the orientation is unclear.
1.
Hold the card with its orientation symbol pointing into the slot and the
top side of the card facing up. The push-button latch may need to be in
before inserting the card.
2.
Slide the card into the slot until it clicks into the connector.
3.
If you encounter too much resistance, do not force the card. Check the
card orientation and try again.
Your notebook will recognize most PC Cards and automatically load the
the appropriate device driver. If the configuration program tells you to
第 2 頁，共 6 頁Peripherals
2003/6/10
file://C:\WINDOWS\TEMP\~hh81E2.htm