User's Manual

Expanding Memory
Memory
Memory
Installing a Memory Module
Removing a Memory Module
Your notebook has 128MB/256MB/512MB DDR-266 installed. You can
extend the memory up to 1GB. The available memory modules are
128MB, 256MB and 512MB.
Read through the information below carefully before you begin. If you
don't feel completely confident installing a memory module yourself,
contact your notebook dealer.
For problems with memory, see Chapter 7, Troubleshooting.
Avoid touching the connectors on the memory module or your
notebook. Grease or dirt on the connectors can cause memory access
problems.
Static electricity can damage the memory module. Before you handle
the module, touch a grounded metal surface to discharge any static
electricity you may have.
Before purchasing new memory for your notebook, check with your
computer dealer for recommended memory modules.
Installing a Memory Module
Removing a Memory Module
Top
Installing a Memory Module
If you are adding a memory module after you have started to use the
computer, begin at step 1. Otherwise, skip to step 3.
1.
If the computer is on, click
Start
.
2.
In the Shut Down Windows dialog box, select
Shut Down
->
OK
.
3.
Remove all cables connected to the computer.
第 1 頁，共 4 頁Expanding Memory
2003/6/10
file://C:\WINDOWS\TEMP\~hhC8CC.htm