User's Manual

Enter New Password [ ]
Confirm New Password [ ]
Type the password and press the [Enter] key. You can type up to eight alphanumeric
alphanumeric characters. Symbols and other keys are ignored. To confirm the
password, type the password again and press the [Enter] key. The System password
password is now set. Note that the "Administrator Password is" field automatically
changes to
Set
.
To change or clear a password, highlight this field and press the [Enter] key.
The following dialog box appears:
Set Administrator Password
Enter Current Password [ ]
Enter New Password [ ]
Confirm New Password [ ]
Enter the current password, then enter the new password, and finally confirm the
new password. To clear the password, enter the current password, then press the
[Enter] key twice. The password is now cleared and the "System Password is" field is
is automatically set to
Clear
.
When changing or clearing the password a "Setup Notice" will inform you that
changes have been saved.
Setup Notice
Changes have been saved.
[ continue]
Press the [Enter] key to register your changes.
If the current password entered does not match the actual current password the
following message will appear:
Setup Warning
Invalid password
Re-enter Password
[ continue]
If the new password and confirm new password strings do not match this message
will appear:
Setup Warning
Password do not match
Re-enter Password
Password Required to Boot
When this field is enabled, the system will require the password before the system
can bootup. This option is only available once an administrator password has been
set. The options for this field are:
Enabled
Disabled
第 11 頁，共 16 頁The BIOS Setup Program
2003/6/10
file://C:\WINDOWS\TEMP\~hh98BD.htm