User's Manual

EPP and ECP modes are only supported with EPP- and ECP-aware peripherals.
The default value for this field is: ECP Mode
Base I/O address
When the Parallel Port field is set to Enabled, and the mode to Normal, Bi-directional
directional or ECP, the "Base I/O address" field becomes available and you can set
the parallel port's I/O address. The following I/O options are available:
378
278
3BC
The default value for this field is: 378
Interrupt
When the Parallel Port field is set to Enabled, the "Interrupt" field becomes available
and you can set the parallel port's IRQ value. The following IRQ options are
available:
IRQ 7
IRQ 5
The default value for this field is: IRQ 7
DMA Channel
This field is only available when the Parallel Port Mode field is set to ECP. It allows
you to configure the Parallel Port's DMA Channel for ECP mode. The following
options are available:
DMA 1
DMA 3
The default value for this field is: DMA 3
Top
The Security Menu
The Notebook's advanced system of security allows you to set a password to
prevent unauthorized access to system resources, data, and the BIOS Setup
program. This section covers each parameter of the Security Menu. Selecting
Security from the menu bar displays the following menu:
第 9 頁，共 16 頁The BIOS Setup Program
2003/6/10
file://C:\WINDOWS\TEMP\~hh98BD.htm