User's Manual

Boot Display Device
This field allows you to specify display type options. They are:
Auto-Selected
Both
Auto-Selected: During the power on process, the system will detect if any display
device is connected on the external video port. If any external display device is
connected, the power on display will be in CRT (or projector) only mode. Otherwise it
will be in LCD only mode. will automatically select the external display if a CRT
monitor is connected to the Notebook.
Both allow you to simultaneously view the Notebook's LCD display and an external
CRT monitor display or projector.
The default value for this field is: Both
Screen expansion
This field allows you to enlarge the LCD viewing area when you operate in lower
resolution. There are two possible settings:
Enabled
Disabled
The default value for this field is: Enabled
Television Type
This field allows you to select the television system mode. There are two possible
settings:
NTSC
PAL
The default setting for this field is: NTSC
VGA Memory
This field displays the amount of shared memory available for the Video Graphics
Array. There are three possible settings: 16MB, 32MB and 64 MB. The default value
for this field is 16MB.
NOTE: The sub-items under each device will not be shown if the device control is set
to disable or auto. This is because the user is not allowed to control the settings in
these cases.
Top
The System Devices Menu
Selecting
System Devices from the menu bar displays the System Devices Menu.
Please see Figure 2-2.
第 6 頁，共 16 頁The BIOS Setup Program
2003/6/10
file://C:\WINDOWS\TEMP\~hh98BD.htm