User Manual

Chapter 6 Commands Reference

Ignore this chapter if your Mini PCI Card does not support modem functions.

This chapter provides the AT command set for the Soft Modem chip set. Some of the

commands described within may not apply to your soft modem, depending on the build

options included in a license. The default values stated are typical for a full-featured Soft

Modem and may be different in reduced configurations.

6.1 Basic AT Command

Cannot Connect to Access Point

If you cannot make a connection to the Access Point, it could be due to one of the following

reasons:

• Make sure the Wireless LAN Card and Access Point have no physical connection

problems.

• Make sure the SSID for the Wireless LAN Card is the same as the Access Point.

• Make sure the privacy type is the same as that of Access Point. Also, make sure the

Default Key is the same for both computers.