User Manual

Chapter 6 Commands Reference
Ignore this chapter if your Mini PCI Card does not support modem functions.
This chapter provides the AT command set for the Soft Modem chip set. Some of the
commands described within may not apply to your soft modem, depending on the build
options included in a license. The default values stated are typical for a full-featured Soft
Modem and may be different in reduced configurations.
6.1 Basic AT Command
67
+FAA=n—Adaptive Answer
+FAA=0 The DCE will answer only as a Class 1 FAX device. No automatic switching
of service class will occur based on the calling device type.
+FAA=1 The DCE can answer and automatically determine whether to answer as a
facsimile DCE or as a data modem.
+FMI—Manufacturer Identification