User Manual

Mini PCI Wireless LAN / Modem Card User's Manual
66
+FPR=n—Select FAX Port Rate
DTE Command DCE Action Description
+FPR=0 Execute +IPR=0. Select automatic rate detection.
+FPR=1 Execute +IPR=2400. Set DTE-DCE to 2400 bits/s.
+FPR=2 Execute +IPR=4800. Set DTE-DCE to 4800 bits/s.
+FPR=4 Execute +IPR=9600. Set DTE-DCE to 9600 bits/s.
+FPR=8 Execute
+IPR=19200.
Set DTE-DCE to 19200 bits/s.
+FPR=10 Execute
+IPR=38400.
Set DTE-DCE to 38400 bits/s.
+FPR=18 Execute
+IPR=57600.
Set DTE-DCE to 57600 bits/s.
+FPR=? (if all values listed
above are supported)
Report (0, 1, 2, 4, 8,
10, 18)
DCE supports 2400 bits/s, 4800 bits/s,
9600 bits/s, 19200 bits/s, 38400 bits/s,
and 57600 bits/s.
+FPR? (if +IPF=0) Report 0. DTE-DCE rate is automatically detected.
+FPR? (if +IFC=2400) Report 1. DTE-DCE rate is 2400 bits/s.
+FPR? (if +IFC=4800) Report 2. DTE-DCE rate is 4800 bits/s.
+FPR? (if +IFC=9600) Report 4. DTE-DCE rate is 9600 bits/s.
+FPR? (if +IFC=19200 Report 8. DTE-DCE rate is 19200 bits/s.
+FPR? (if +IFC=38400) Report 10. DTE-DCE rate is 38400 bits/s.
+FPR? (if +IFC=57600) Report 18. DTE-DCE rate is 57600 bits/s.
+FPR? (all other +IPR
setting)
Report 255. Indicates invalid setting.