User Manual

Chapter 6 Commands Reference

Ignore this chapter if your Mini PCI Card does not support modem functions.

This chapter provides the AT command set for the Soft Modem chip set. Some of the

commands described within may not apply to your soft modem, depending on the build

options included in a license. The default values stated are typical for a full-featured Soft

Modem and may be different in reduced configurations.

6.1 Basic AT Command

Base

Unit

Default*

S28

General bit-mapped options status: pulse

dialing, mode selection.

— — 160(10100000b)

S29 Flash dial modifier time. 0—255 10 ms 70

S30 Inactivity timer. 0—255 10 s 0

S32 Xon character. 0—255 ASCII 17 (11h)

S33 Xoff character. 0—255 ASCII 19 (13h)

S35 Reserved. — — —