User Manual

Chapter 6 Commands Reference
Ignore this chapter if your Mini PCI Card does not support modem functions.
This chapter provides the AT command set for the Soft Modem chip set. Some of the
commands described within may not apply to your soft modem, depending on the build
options included in a license. The default values stated are typical for a full-featured Soft
Modem and may be different in reduced configurations.
6.1 Basic AT Command
51
Result Code
Numeric
Code
Description
CONNECT 1 Modem connected to line.
RING 2 Incoming ring signal has been detected.
NO CARRIER 3 Modem lost carrier signal, does not detect carrier
signal, or does not detect answer tone.
ERROR 4 Invalid command.
CONNECT 1200 EC* 5 Connection at 1200 bits/s.
NO DIALTONE 6 No dial tone detected.