User Manual

Mini PCI Wireless LAN / Modem Card User's Manual
40
&C1 DCD turns on when the remote modem’ s carrier signal is detected and off when the
carrier signal is not detected (default).
&Dn—Data Terminal Ready (DTR) Control
&D0 Ignore the true status of DTR and treats it as always on. This should be used only if
the computer does not provide DTR to the modem.
&D1 If the DTR signal is not detected while in on-line data mode, the modem enters
command mode, issues the OK result code, and remains connected.
&D2 If the DTR signal is not detected while in on-line data mode, the modem disconnects
(default).
&D3 Reset modem on the on-to-off DTR transition.
&Fn—Restore Factory Default Configuration
&F0 Restores factory default configuration.
&Gn—V.22bis Guard Tone Control
&G0 Disables guard tone (default).
&G1 Selects 550 Hz guard tone.
&G2 Selects 1800 Hz guard tone.
&Jn—Auxiliary Relay Option
&J0 The auxiliary relay is never closed (default).