User Manual

Chapter 6 Commands Reference
Ignore this chapter if your Mini PCI Card does not support modem functions.
This chapter provides the AT command set for the Soft Modem chip set. Some of the
commands described within may not apply to your soft modem, depending on the build
options included in a license. The default values stated are typical for a full-featured Soft
Modem and may be different in reduced configurations.
6.1 Basic AT Command
37
On—Return to On-Line Data Mode
O0 Instructs LU97 to exit on-line command mode and return to data mode.
O1 Issues a retrain before returning to on-line data mode.
O3 Issues a rate renegotiation before returning to on-line data mode.
Pn—Select Pulse Dialing
Qn—Result Code Control
Q0 Enables result codes (default).