User Manual

Chapter 6 Commands Reference
Ignore this chapter if your Mini PCI Card does not support modem functions.
This chapter provides the AT command set for the Soft Modem chip set. Some of the
commands described within may not apply to your soft modem, depending on the build
options included in a license. The default values stated are typical for a full-featured Soft
Modem and may be different in reduced configurations.
6.1 Basic AT Command
35
In—Request ID Information
I0, I3 Returns modem identity string and driver version number.
I1 Returns OK.
I2 Returns OK.
I4 Returns firmware version for the data pump.
I5 Returns the board/firmware ID and country ID in hexadecimal.
I6, I10 Returns OK for compatibility.
I7 Hardware version.